Description

– Vacuum mounting of castable mounting resins significantly improves penetration of voids and provides betteredge retention.

– The LSSA-011 vacuum impregnation unit allows for pouring the resin under maximum vacuum and for mounting multiple specimens in one go.

– The vacuum mounting chamber is designed to fill voids in specimens by first pulling a vacuum, then pouring the resin, followed by slowly increasing the pressure in order to force or push the castable resin (epoxy, acrylic, or polyester) into the voids, porosity,cracks, or other crevices in the
specimen.

---

Specifications of Castable Jar:

Feature	Specification
Bell jar	Tilting, retractable pouring arm
Mount size	1 to 2-inch diameter (25-50 mm)
Vacuum	Vacuum pump (sold separately)
Dimensions	12 x 12 x 12-inch
	(300x 300 x 300 mm)
Weight	2.2 lbs (1 kg)

Specifications of Pump :

Description	110V Vacuum Pump	220V Vacuum Pump
Flow Rate	2.5 CFM	7.2 m3/h
Ultimate Vacuum	10 Pa	0.2 Pa
Power	120 W -0.17 hp	370 W – 0.5 hp
Inlet Port	¼” SAE and ½” ACME ports	7/16-inch – 20
Dimensions (W x D x H)	11 x 4.75 x 9-inch	13 x 5.5 x 10-inch
	(279 x 120 x 229 mm)	(337 x 138 x 254 mm)
Weight	16.5 lbs (7.5 kg)	22 lbs (10 kg)
Part No.	VAC-110	VAC-220