Diamond Cut-Off Wheels

Diamond Cut Off wheels are normally used for cutting hard materials such as tungsten carbide, ceramic and glass.



– Diamond cut off wheels are used on low speed cut off machines, where you can accurately cut the material into even sections (Eg cutting sections for metallurgical analysis).

– Diamond coated sample preparation cut-off wheels available from 75-350mm diameters. Other sizes available on request.

– It is recommended that Kemet Cutting and Coolant Fluid be used with these wheels.

Specifications :

Code Diameter Thickness Arbor Type / Materials
600017 75mm 0.15mm 12.7mm High concentration Metal Bond for ferrous metals and medium / hard ceramics.
600018 100mm 0.3mm 12.7mm
600019 125mm 0.4mm 12.7mm
600026 150mm 0.5mm 12.7mm
600028 175mm 0.6mm 12.7mm
600029 200mm 0.8mm 12.7mm
600032 75mm 0.15mm 12.7mm Low concentration Metal Bond for ceramics, glass and geological samples.
600033 100mm 0.3mm 12.7mm
600034 125mm 0.4mm 12.7mm
600035 150mm 0.5mm 12.7mm
600036 175mm 0.6mm 12.7mm
600037 200mm 0.8mm 12.7mm
600038 100mm 0.4mm 12.7mm Continuous Rim Diamond Cut off Wheels for Petrography.
600044 150mm 1.0mm 12.7mm
600048 200mm 1.35mm 12.7mm
600049 250mm 1.35mm 32mm
600059 300mm 1.6mm 32mm
600075 350mm 2.4mm 32mm